Leica Biosystems PELORIS_PELORIS II - Manual (Page 18)

Introduction
Leica PELORIS™ User Manual Rev K © Leica Biosystems Melbourne Pty Ltd 2011 18
1.1 Summary of Chapters

Chapter 1, Introduction: general introduction, chapter summary, general instructions for
using the software, and help resources.

Chapter 2, Hardware: descriptions of the main components of the Peloris instrument.

Chapter 3, Running Protocols: main steps for running protocols, further configuration
options and scheduling, monitoring processing on the Status screen.

Chapter 4, Protocol Setup: descriptions of protocol types and the reagent selection
methods used; protocol validation and the carryover setting. Creating and editing protocols.

Chapter 5, Reagent Setup: reagent groups, types and stations, and reagent management
on the Peloris. Setting up reagent types and stations in the software. Replacing reagents.

Chapter 6, Settings & Ancillary Operations: basic instrument settings, independent
operation of instrument components, event monitoring, alarms, and transfer of system files.

Chapter 7, Cleaning and Maintenance: daily and as-required maintenance, accessories
available from Leica Microsystems.

Chapter 8, Reference: descriptions of the pre-defined protocols and recommended bottle
configurations. Recommended reagent thresholds and reagent compatibility tables.

Chapter 10, Consumables and Accessories: a list of Peloris consumables and accessories
with part numbers for easy ordering.

Chapter 11, Specifications: system specifications.
1.2 Using the Software
Control all instrument functions from the touch-screen. This section describes basic touch-screen
operation and how to navigate the software, with a summary of all the software screens. It also
describes user access levels.
See sections:

1.2.1 Basic Operation

1.2.2 Navigation

1.2.3 Access Levels