Leica Biosystems PELORIS_PELORIS II - Manual (Page 48)

Running Protocols
Leica PELORIS™ User Manual Rev K © Leica Biosystems Melbourne Pty Ltd 2011 48
There are ten operations reported for the retorts:

Ready — the retort is available for any new action

Reserved — a protocol is loaded but has not yet started

Processing — the retort is currently running a protocol

Completed — the retort has completed the loaded protocol

Drying — the retort is being dried as the final step of a cleaning protocol

Filling — the retort is currently filling

Draining — the retort is currently draining

Pending (drain or fill) — the retort is waiting for resources to perform a fill or drain

Abandoning — the retort is abandoning the current action

Unavailable — the retort cannot be used, contact your service representative.
Retorts have five possible states:
Means Icon
Full
The retort contains the correct amount of wax or
reagent for the specified basket level.
Part full
The reagent or wax level is between full and empty,
this usually occurs during a fill or drain operation.
Empty
The retort is drained but contains residue.
Clean
There is no residue in the retort. This only occurs
after a cleaning protocol.
Retort
inoperative
A red cross over a retort indicates that a hardware
failure has occurred and the retort is unavailable.
Contact your service representative.