Rockwell Automation 57C570 AutoMax PC3000 User Manual - Manual (Page 104)

7Ć6
TYPICAL BNC
CONNECTOR
FERRULE ON
ANVIL OF
CRIMPING DIE
SHOULDER ON
CONNECTOR BODY
BUTTS AGAINST DIE
Figure 7.7 Ć Connector Installation Step 9 for RGĆ59/U Cable
Step 10. Hold the assembly in place, and close the crimp tool
handles until the ratchet releases.
Step 11. Remove the crimped assembly from the crimping dies.
The connector is now attached to the coax cable, as
shown in figure 7.8.
CRIMPED FERRULE
Figure 7.8 Ć Connector Attached to RGĆ59/U Cable