Rockwell Automation 57C570 AutoMax PC3000 User Manual - Manual (Page 114)

8Ć2
8.1 Installing the StandĆAlone Transceiver
The StandĆAlone Transceiver may be mounted vertically or
horizontally. Horizontal mounting is recommended, however, to
provide better access to transceiver LEDs, connectors, and
adjustments.
Use the following procedure to install the StandĆAlone Transceiver:
Step 1.
Prepare the mounting surface using the mounting
dimensions shown in figure 8.1 for the correct placement
of the holes.
123
45
6
Transceiver
4.810
5.190
2.350
1.500
.750
.187 Dia. (6) Places
1.320
Note: All dimensions shown in inches.
TOP VIEW
SIDE VIEW
Figure 8.1 Ć StandĆAlone Transceiver Mounting Dimensions
Step 2. Secure the transceiver to the mounting surface using #8
screws.
Step 3. Verify that the external power supply is turned off. Make
the drop cable and input power connections to the
transceiver terminal block as shown in figure 8.2.