Rockwell Automation 57C570 AutoMax PC3000 User Manual - Manual (Page 49)

3Ć11
Step 9. Calculate the number of required cable system
components and select their types.
Step 10. Select the tools and instruments necessary to perform the
cable system installation.
Step 11. Select the proper personnel to perform the cable
installation. The RGĆ59/U and RGĆ11/U cables specified in
this manual are flexibleĆtype cables, which can be installed
by a trained plant electrician.
3.3.4 Cable System Protection and Isolation
Recommendations
The cable installation should conform to all applicable codes. To
reduce the possibility of noise interfering with the control system,
exercise care when installing cable from the system to the external
devices. The following sections provide detailed recommendations.