Rockwell Automation 57C570 AutoMax PC3000 User Manual - Manual (Page 96)

6Ć4
20845ĆM
POWER
SWITCH
Figure 6.3 Ć Locating the AutoMax PC3000 Power Switch
6.7 Installation Considerations When
Installing a Microprocessor Card in the
PC3000 Industrialized Chassis
You can install a userĆsupplied, ISAĆcompatible microprocessor card
into the AutoMax PC3000 industrialized chassis, making it an
industrialized personal computer. To install a microprocessor card
into the PC3000 chassis, follow these steps:
Step 1.
Make sure that power to the chassis is off; disconnect the
power leads for extra safety.
Step 2. Follow the installation instructions provided by the card's
manufacturer.
Step 3. Set jumpers E3 and E4 according to figure 6.4.