Rockwell Automation 57C570 AutoMax PC3000 User Manual - Manual (Page 226)

20Ć8
20.4.1 Accessing the Device Manager List
To access the Device Manager list, follow these steps:
Step 1.
From Windows 95, select the Start menu from the task
bar.
Step 2. From the Start menu, select Settings, and choose Control
Panel.
Step 3. DoubleĆclick the System icon.
Step 4. Once the System Properties dialog box is open, choose
the Device Manager tab.
20.4.2 Removing the Processor Card from the Device
Manager List
To remove the Processor card from the Device Manager list, follow
these steps:
Step 1.
In the Device Manager, doubleĆclick the PC3000 device
listing. You see the Reliance Electric AutoMax PC3000
listed.
Step 2. Select the Reliance Electric AutoMax PC3000 card you
want to remove, and choose the Properties button.
Step 3. Choose the Resources tab.
Step 4. Make sure the memory address displayed matches the
recorded memory address.
NOTE: If you have multiple PC3000 cards installed in the
PC and the memory address displayed does not match
the address you recorded, the PC3000 Processor card
you selected in Step 1 is not the card you want to remove.
Do the following:
a) Leave the Properties tab for this card by clicking
Cancel.
b) Choose the other Processor card listed.
c) Repeat steps 2 through 4.
Step 5. In the Device Manager, click the Remove button.
Step 6. Confirm that you removed the device by clicking OK.
Step 7. Close the System Properties and the Control Panel.