Rockwell Automation 57C570 AutoMax PC3000 User Manual - Manual (Page 272)

FĆ4
Using the Sample Programs
Sample programs have been developed to illustrate how to perform a variety of
tasks. You can copy these programs and tailor them to your application. They
have been written using the AutoMax BASIC, Control Block, and Ladder Logic
languages. These programs reference the variable names defined in the Variable
Configurator. You can view the list of tasks in the Task Manager after you have
copied the templates. The following table explains the purpose of each sample
program.
This program: Is written using the: And performs this function:
ABFLASH BASIC language Flashes LEDs on the Flex I/O
modules
ABPCFLSH Ladder Logic language Flashes LEDs on the Flex I/O
modules
ABINIT BASIC language Initializes the AĆB remote I/O
scanner interface.
FLEX Ladder Logic language Interlocks I/O for the FlexPak
3000 DC drive
S1FLEX Control Block Transfers the FlexPak 3000
configuration to the drive over
the DCSĆNET network
S1SPD Control Block Transfers the GV3000
configuration to the drive over
the DCSĆNET network
S1SQ Ladder Logic language Interlocks I/O for the GV3000 AC
drive