Rockwell Automation 57C570 AutoMax PC3000 User Manual - Manual (Page 128)

10Ć6
PC3000 Serial card) or via the ISA bus if the PC3000 Processor card
resides in a PC chassis.
PC with a PC3000 installed
PC3000 Packaged
Version
DCSĆNET network
Serial
Cable
Serial
Cable
ISA bus used as programming connection.
PC with the PCĆLink Interface
module installed
Once you connect a programming device to the DCSĆNET network,
you can communicate with any drop on the network.
Figure 10.4 Ć Connecting to PC3000 Via the DCSĆNET Network
БББББББББ
БББББББББ
For more information about: ББББББББББББ
ББББББББББББ
See:
БББББББББ
Б БББББББ Б
БББББББББ
communicating over the
DCSĆNET network
ББББББББББББ
Б ББББББББББ Б
ББББББББББББ
AutoMax Programming Executive
instruction manual
БББББББББ
БББББББББ
using the PC Link Interface
Module ББББББББББББ
ББББББББББББ
PC Link Interface Module
instruction manual
10.6 What to Do Next
Once online communication is configured, you can load the PC3000
operating system. See chapter 11 for information about using Ports
A and B for RSĆ232 and RSĆ422 communication.