Rockwell Automation 57C570 AutoMax PC3000 User Manual - Manual (Page 120)

8Ć8
Align the connector's pin with the slot in the transceiver's
port. See figure 8Ć9. Push the connector onto the port.
Turn the connector clockwise until it locks onto the port's
two pins. Do not bend or kink the wire when you attach it
to the port. Bending the wire sharply could break the fiber
inside.
LEDs
ST
Connector
Pin
Pins
RT
Slot
Transceiver
Figure 8.9 Ć FiberĆOptic Ports and Connectors
8.6 What to Do Next
Finish installing your other system components.
For information about: See chapter:
installing a coaxial cable network 7
maintaining the DCSĆNET network 21
configuring network variables and
setting the drop number
12