0 - maintaining the automax pc3000, 1 handling the cards – Rockwell Automation 57C570 AutoMax PC3000 User Manual User Manual

Page 219

Advertising
background image

20Ć1

20.0 MAINTAINING THE AutoMax

PC3000

Routine maintenance of the AutoMax PC3000 includes replacing:
D the battery on the AutoMax PC3000 Processor card
D the air filter for the Industrial AutoMax PC3000 chassis

БББББББББББББ

БББББББББББББ

For information about:

ББББББББ

ББББББББ

See this section:

БББББББББББББ

БББББББББББББ

Handling the Cards

ББББББББ

ББББББББ

20.1

БББББББББББББ

БББББББББББББ

Replacing the Battery on the AutoMax PC3000

Processor Card

ББББББББ

ББББББББ

20.2

БББББББББББББ

БББББББББББББ

Replacing the AutoMax PC3000 Processor Card

ББББББББ

ББББББББ

20.3

БББББББББББББ

БББББББББББББ

Removing the old AutoMax PC3000 Processor

Card from the Device Manager

ББББББББ

ББББББББ

20.4

БББББББББББББ

БББББББББББББ

Replacing the AutoMax PC3000 Serial Card

ББББББББ

ББББББББ

20.5

БББББББББББББ

Б

БББББББББББ

Б

БББББББББББББ

Replacing the AutoMax PC3000

Packaged Version

ББББББББ

Б

ББББББ

Б

ББББББББ

20.6

БББББББББББББ

БББББББББББББ

Replacing the Filter for the AutoMax PC3000

Packaged Version

ББББББББ

ББББББББ

20.7

БББББББББББББ

БББББББББББББ

What to Do Next

ББББББББ

ББББББББ

20.8

20.1

Handling the Cards

CAUTION: The printed circuit boards are staticĆsensitive. You should wear an

antiĆstatic wrist band (user supplied) while installing the AutoMax PC3000 Processor or

Serial cards. Avoid touching the cards components, connectors, or leads. Failure to

observe this precaution could result in damage to or destruction of the equipment.

When handling the AutoMax PC3000 Processor or Serial card, hold

the card only at its edges.

20.2

Replacing the Battery on the AutoMax

PC3000 Processor Card

The battery retains the PC3000 memory for about 186 days in the

event of a power failure. Replace the battery only with Reliance

Electric M/N 57C385.
The super capacitor provides a minimum of ten minutes (a

maximum of ten hours) of backup power after the

BATTERYSTATUS4@ variable goes false and power is removed

from the rack. You need to replace the battery before backĆup power

fails to avoid reĆloading the operating system and application tasks.
When replacing the battery, you must:
D remove the AutoMax PC3000 Processor card
D replace the battery
D reĆinstall the AutoMax PC3000 Processor card

Advertising
This manual is related to the following products: