Rockwell Automation 57C570 AutoMax PC3000 User Manual - Manual (Page 256)

DĆ4
Input Image Table
Register: Bit: Function: Access:
Rack 20 384Ć391 Rack 20 Input image table read
Rack 21 392Ć399 Rack 21 Input image table read
Rack 22 400Ć407 Rack 22 Input image table read
Rack 23 408Ć415 Rack 23 Input image table read
Rack 24 416Ć423 Rack 24 Input image table read
Rack 25 424Ć431 Rack 25 Input image table read
Rack 26 432Ć439 Rack 26 Input image table read
Rack 27 440Ć447 Rack 27 Input image table read
Rack 30 448Ć455 Rack 30 Input image table read
Rack 31 456Ć463 Rack 31 Input image table read
Rack 32 464Ć471 Rack 32 Input image table read
Rack 33 472Ć479 Rack 33 Input image table read
Rack 34 480Ć487 Rack 34 Input image table read
Rack 35 488Ć495 Rack 35 Input image table read
Rack 36 496Ć503 Rack 36 Input image table read
Rack 37 504Ć511 Rack 37 Input image table read
Remote Rack Status (8 words per rack)
Register: Bit: Function: Access:
Rack 0 512 0 Rack 0 Enable.
To enable the rack, set this bit
to 1. To disable the rack, set
this bit to 0.
read/write
513 Rack 0 Rack Status
A value of 0 means rack 0 is
not being updated.
A value of 1 means rack 0 is
OK in RUN mode.
A value of 2 means rack 0 is
OK and not in RUN mode.
A value of 3 means rack 0 has
an error.
read
514 Module group ending rack 0
A value of 0 means rack 0
ends at I/O group 1.
A value of 1 means rack 0
ends at I/O group 3.
A value of 2 means rack 0
ends at I/O group 5.
A value of 3 means rack 0
ends at I/O group 7.
read
515 Rack 0 timeouts.
After 255 timeouts, the
counter restarts at 0.
read