Rockwell Automation 57C570 AutoMax PC3000 User Manual - Manual (Page 230)

20Ć12
20.6 Replacing the AutoMax PC3000 Packaged
Version
You can replace individual cards within the chassis; see sections
20.3 and 20.5. To replace the entire chassis, follow these steps:
Step 1.
Turn off the AutoMax PC3000, and disconnect its
incoming power.
Step 2. Disconnect the AllenĆBradley Remote I/O cables and the
DCSĆNET network cables, if present.
Step 3. UnĆmount the chassis.
Step 4. Mount the new chassis. See chapter 6 for more
information.
20.7 Replacing the Filter for the AutoMax
PC3000 Packaged Version
We recommend that you inspect the AutoMax PC3000 Packaged
Version's filter every month. The type of environment in which it is
used determines how frequently you must replace the filter.
An extra filter ships with each AutoMax PC3000 Package Version.
For additional filters, contact AllenĆBradley Ċ Reliance Global
Technical Services at 1Ć800Ć669Ć6119.
To replace the filter, refer to figure 20.1 and follow these steps:
20841-M
Figure 20.1 Ć Replacing the Chassis Filter
Step 1. Turn off the AutoMax PC3000, and disconnect its
incoming power.
Step 2. Using a Phillips screwdriver, remove the screws at the
bottom of the filter cover.