Rockwell Automation 57C570 AutoMax PC3000 User Manual - Manual (Page 87)

5Ć9
20838ĆM
Figure 5.4 Ć Connecting the Ribbon Cable
Step 5. Secure the card with the slot cover's screw.
Step 6. Replace the computer's cover.
5.6 Wiring Considerations
DANGER
USERS ARE RESPONSIBLE FOR CONFORMING WITH THE NATIONAL
ELECTRICAL CODE AND ALL OTHER APPLICABLE LOCAL, NATIONAL, AND
INTERNATIONAL CODES. WIRING PRACTICES, GROUNDING, DISCONNECTS,
AND OVERĆCURRENT PROTECTION ARE OF PARTICULAR IMPORTANCE.
FAILURE TO OBSERVE THIS PRECAUTION CAN RESULT IN SERIOUS BODILY
INJURY OR LOSS OF LIFE.
To reduce the possibility of electrical noise interfering with the proper
operation of the control system, exercise care when installing the
wiring from the system to the external devices. For detailed
recommendations, refer to IEEE 518.