Rockwell Automation 57C570 AutoMax PC3000 User Manual - Manual (Page 89)

5Ć11
Figure 5.5 Ć List of Device Conflicts
Step 3. Deselect the Use automatic settings option.
Step 4. Based on the list of conflicting devices, select the
appropriate Resource Type from the list.
Step 5. Click the Change Setting button, and choose another
value in the Value list. Make sure that the new value does
not conflict with other devices. This information is
displayed in the Conflict Information box.
Step 6. Click OK to return to the Resources tab.
Step 7. Use this table to determine your next step.
ББББББББББ
ББББББББББ
If:
ББББББББББ
ББББББББББ
Then:
ББББББББББ
ББББББББББ
other conflicting devices are present
ББББББББББ
ББББББББББ
repeat steps 5-7 for each remaining
conflicting device
ББББББББББ
Б ББББББББ Б
Б ББББББББ Б
Б ББББББББ Б
Б ББББББББ Б
ББББББББББ
no other conflicting devices exist ББББББББББ
Б ББББББББ Б
Б ББББББББ Б
Б ББББББББ Б
Б ББББББББ Б
ББББББББББ
a) At the Resource tab, click OK.
b) When prompted to confirm that
you have manually changed the
card's settings, click Yes.
c) When prompted, shutdown the
Windows 95 operating system
and restart the computer.
Step 8. Finish installing the Processor card by editing the
SYSTEM.INI and CONFIG.SYS files. Go to section 5.4.2
and 5.4.3.