Rockwell Automation 2099-BMxx Kinetix 7000 High Power Servo Drive User Manual - Manual (Page 179)

Rockwell Automation Publication 2099-UM001D-EN-P - December 2012 179
Appendix
C
Upgrade Firmware
This appendix provides procedures for using ControlFlash utility to upgrade the
firmware in a Kinetix 7000 drive.
Before You Begin Upgrading the firmware of a Kinetix 7000 servo drive using ControlFlash
involves entering the name of the target device, locating the SERCOS interface
module and Kinetix 7000 servo drive to be flashed, finding the existing new
firmware levels, and flashing the drive firmware.
Before you begin this procedure, make sure you have the following.
Topic Page
Before You Begin 179
Upgrade Firmware 180
Description Catalog Numbers Version
RSLogix 5000 Software 9324-RLD300NE 15.0 or later
RSLinx Software 0355-RSLETENE 2.50.00 or later
ControlFlash Kit
(1)
(1) For ControlFlash information not specific to the Kinetix 7000 drive family, refer to the ControlFlash Firmware Upgrade Kit Quick
Start, publication 1756-QS105 .
N/A 4.00.09 or later
Firmware for Logix SERCOS interface module or
PCI card 1756-MxxSE 15.32 or later
1756-L60M03SE 15.4 or later
1768-M04SE 15.35 or later
1784-PM16SE 15.33 or later
Firmware upgrade file for Kinetix 7000 (2),(3)
(2) Contact Rockwell Automation Technical Support at (440) 646-5800 for firmware upgrade files and assistance.
(3) Go to http://support.rockwellautomation.com/firmware.asp for firmware upgrades.