Rockwell Automation 2099-BMxx Kinetix 7000 High Power Servo Drive User Manual User Manual
Page 69
Rockwell Automation Publication 2099-UM001D-EN-P - December 2012
69
Kinetix 7000 Connector Data
Chapter 3
• See the Kinetix Motion Control Selection Guide, publication
for cables compatible with the Kinetix 7000 drive and motor.
• Low profile connector let you develop a custom cable for the Motor
Feedback (MF) or Auxiliary Feedback (AF) connectors.
The following table details power supply specifications for the motor and
auxiliary feedback connectors.
Table 29 - Motor and Auxiliary Feedback Power Supply Specifications
Power
Supply
Signal Name
Voltage (V DC)
Current (mA)
Min Nom Max Min
Max
+5V
EPWR_5V
5.13 5.4 5.67 10 400
(1)
(3)
(1) 400 mA on the 5V supply split in any manner between the channels with no load on the 5V supply.
+9V
EPWR_9V
8.3 9.1 9.9 10
275
(2)
(3)
(2) 275 mA on the 9V supply split in any manner between the channels with no load on the 9V supply.
(3) 300 mA on the 5V supply on one channel with 150 mA on the 9V supply on the second channel.