Metrohm 746 VA Trace Analyzer - Manual (Page 292)

5.6.3 SUBSTANCES
746 VA Trace Analyzer / 747 VA Stand
5-141
Method: XXXXXXXX SUBSTANCES
........ - XXXXXXXX
Calibration XXXX-XX-XX XX:XX
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД
Technique none
Modify
column
Modify
line
Select
subst.
Link to
segment
Delete
subst.
Subst.
name
>>
Softkeys Meaning
Meaning of the softkeys F1...F7, see page 130
>> Switching to subpage "Substance parameters"
Switching to the subpage "Substance parameters" with the parame-
ters for substance recognition, baseline calculation, scaling and
evaluation.
Parameter Range; Default value / Meaning
Technique none, std.add., cal.crv., int.std.; none
Calibration technique
In order to determine the sample content (mass concentration) from
the measured current or area values for the substances
EV:<subst.> ,
a calibration is required (see section 6.9). One of the following calibra-
tion techniques can be selected for this (with
none , no calculation is
performed):
none None
std.add. Standard addition
cal.crv. Calibration curve
int.std. Internal standard
21
20 19
20 19
22
23
24