Metrohm 746 VA Trace Analyzer - Manual (Page 407)

5.7 Program instructions
746 VA Trace Analyzer / 747 VA Stand
5-256
PREP) Page: O Stand: A Abbreviation: PR
Instructions t/s Main parameters Auxiliary parameters
––––––––––––– ––––– ––––––––––––––––––––––––– –––––––––––––––––––––––––
## .. PREP) .....
Function End of the block for sample preparation on the 695 Autosampler.
Description The PREP) instruction closes a block opened with (PREP for sample
preparation on the sample rack of the 695 Autosampler paralleling
measurement. This block can contain any number of instructions
admissible for the sample preparation.
The PREP block must be called up with the >PREP instruction. As soon
as the program running for the current sample in the measuring vessel
allows, the instructions defined in the PREP block are executed with the
following sample on the sample rack of the 695 Autosampler.
Comments see (PREP
Example see (PREP
see also (PREP, >PREP