Metrohm 746 VA Trace Analyzer - Manual (Page 575)

8 Technical data
746 VA Trace Analyzer / 747 VA Stand
8-14
8.3.5 Handshake
The 746 VA Trace Analyzer offers the following possibilities to set the handshake
(see section 5.3.1):
No handshake ( none )
The 746 VA Trace Analyzer neither checks handshake inputs (CTS, DSR, DCD) nor
sets handshake outputs (DTR, RTS).
Reduced hardware handshake ( HWshort )
746 VA Trace Analyzer as receiver:
LF
RTS
DTR
RxD
RTS
DTR
RxD
746 VA Trace Analyzer as sender:
LF
RTS
CTS
TxD
RTS
CTS
TxD
DTR DTR
The data flow can be interrupted by deactivating the CTS line.
Full hardware handshake ( HWfull )
All handshake inputs are checked, all handshake outputs are set.
746 VA Trace Analyzer as receiver:
LF
RTS
DTR
RxD
RTS
DTR
RxD
Time
External device 746
Time
External device
Gerät
746
Time
External device 746