H3C Technologies H3C Intelligent Management Center - Manual (Page 349)

335
Figure 280 Web application details
Lync 2010
Lync 2010 is a C/S model communication application offered by Microsoft. APM can monitor Lync 2010
through WMI.
The following information describes how to add and modify a Lync 2010 application monitor.
Adding a Lync 2010 application monitor
To add a Lync 2010 application monitor, follow these restrictions and guidelines:
• Configure and enable WMI on the hosts where Lync 2010 is deployed. For more information about
enabling WMI, see Windows Server online Help.
• Obtain the username and password of the authorized Windows host administrator. The username
and password are required for adding the application monitor.
• Add the hosts where Lync 2010 is deployed to the IMC platform so APM can obtain and display
network connections of the hosts and their access devices in the application topology. For more
information about adding hosts to the IMC platform, see H3C IMC Base Platform Administrator
Guide.
• If a probe is configured, APM sends the IP address and traffic collection port number of Lync 2010
to the probe to collect traffic. The traffic collection result is displayed in the Lync 2010 monitor
report.
To add a Lync 2010 application monitor:
1. Click the Resource tab.
2. Enter the Add Application page in one of the following ways:
{
From the navigation tree, select Application Manager > Add Application.
{
From the navigation tree, select Application Manager > Application Monitor. In the application
monitor list, click Add.
The Add Application page displays all application types that can be monitored by APM.
3. Click Lync 2010 of the Application Server class.
The page for adding a Lync 2010 application monitor appears.
4. Configure the following parameters:
{
IP Address—Enter the IP address of the Lync 2010 server to be monitored. APM automatically
checks the IP address and associates the application monitor with the Lync 2010 server if it is
already managed in the IMC platform. To monitor a Lync 2010 server that is already managed
in the IMC platform, you can also click Select and select the Lync 2010 server in the Select
Devices dialog box. For information about selecting a Lync 2010 server, see " 2 Quick start ."
{
Name—Enter a unique application monitor name. H3C recommends naming the application
monitor as Application name_Lync 2010 server IP address.
{
Use Template—Select Enable or Disable from the list.