H3C Technologies H3C Intelligent Management Center - Manual (Page 612)

598
Word Automation Services
The data was obtained when APM last polled Office SharePoint 2013.
Word Automation Services area fields:
• Name—Name of the Word automation service.
• Timer Job Execution Time—Duration of the conversion task.
ActiveMQ
ActiveMQ is an open source message queue product offered by Apache Software Foundation. APM can
monitor ActiveMQ 5.8.0 through JMX but does not collect traffic for ActiveMQ.
The following information describes how to add and modify an ActiveMQ application monitor, and view
the monitor report.
Adding an ActiveMQ application monitor
To add an ActiveMQ application monitor, follow these restrictions and guidelines:
• Contact the ActiveMQ administrator to enable JMX.
• If JMX requires authentication, obtain the username and password of the ActiveMQ administrator.
The username and password are required for adding the application monitor.
• Add the hosts where ActiveMQ is deployed to the IMC Platform so APM can obtain and display
network connections of the hosts and their access devices in the application topology. For more
information about adding hosts to the IMC Platform, see H3C IMC Base Platform Administrator
Guide.
To add an ActiveMQ application monitor:
1. Click the Resource tab.
2. Enter the Add Application page in one of the following ways:
{
From the navigation tree, select Application Manager > Add Application.
{
From the navigation tree, select Application Manager > Application Monitor. In the application
monitor list, click Add.
The Add Application page displays all application types that can be monitored by APM.
3. Click ActiveMQ of the Middleware/Portal Monitor class.
The page for adding an ActiveMQ application monitor appears.
4. Configure the following parameters:
{
IP Address—Enter the IP address of the ActiveMQ server to be monitored. APM automatically
checks the IP address and associates the application monitor with the ActiveMQ server if it is
already managed in the IMC Platform. To monitor an ActiveMQ server that is already managed
in the IMC Platform, you can also click Select and select the ActiveMQ server in the Select
Devices dialog box. For information about selecting an ActiveMQ server, see "2 Quick start."
{
Name—Enter a unique application monitor name. H3C recommends naming the application
monitor as Application name_ActiveMQ server IP address.
{
Use Template—Select Enable or Disable from the list.
{
Template—Click the Configure link next to the Template field to select an existing template.
The Template field is automatically populated with the name of the selected template. For more