H3C Technologies H3C Intelligent Management Center - Manual (Page 552)

538
{
Traffic Collection Port—Modify the service port number for SFTP. This field appears only when
at least one probe is configured for APM.
{
Polling Interval (min)—Select a polling interval for the application monitor. Available options
include 1, 2, 3, 4, 5, 10, 20, and 30 in minutes. A shorter polling interval provides more
accurate real-time data but consumes more system resources.
{
Contact—Modify the contact information, such as name, email address, and telephone
number.
{
Related Applications—Modify the application that the SFTP service depends on. Enter the
complete or part of the application monitor name in the Search field at the top of the window,
and click Search. Select the application that the SFTP server depends on, and then click OK.
Operating system applications, such as Windows, AIX, SCO UNIX, FreeBSD, OpenBSD,
HP-UX, Solaris, Mac OS, and Linux, cannot be selected. Operators can view all dependencies
of the application in the dependency topology. APM automatically adds the dependencies
between the SFTP service and operating system applications by IP address and displays their
dependencies in the application topology.
To remove the relationship between the SFTP service and the specified application, select the
application in the Related Applications field, and then click Delete.
{
Detect Application—Select this parameter if you want to enable application detection.
Application detection enables APM to verify connection to the application by using the previous
parameter settings, and to determine whether to modify the application monitor based on the
verification result. APM modifies the application monitor only when it can connect to the
application. When this parameter is not specified, APM modifies the application monitor
without verifying the connection.
5. Click OK.
Viewing the SFTP service application monitor report
After adding the SFTP service application monitor, APM collects application index data to calculate its
availability and health status. Obtain monitor indexes for SFTP by viewing the monitor report.
To access the SFTP service application monitor report:
1. Click the Resource tab.
2. Select Application Manager > Application Monitor from the navigation tree.
The application monitor list page displays all application monitors.
3. Click the link naming an SFTP application monitor.
The monitor report of SFTP appears, as shown in
Figure 444 . For information about the icons in the
monitor report, see " 2 Quick start ." This section describes the fields in each area of the monitor
report.