H3C Technologies H3C Intelligent Management Center - Manual (Page 399)

385
a. Open the names.nsf file on the IBM Lotus Domino server. By default, the file is located at
IBM\Domino\data in the Domino installation path.
b. From the navigation tree, select Configuration > Severs > All Server Documents.
c. Double-click the Lotus Domino server to be monitored in the window for selecting a Lotus
Domino server.
The page for configuring the Lotus Domino server appears.
2. Configure DIIOP:
a. Select Ports... > Internet Ports... > DIIOP.
b. Enter a TCP/IP port number in the TCP/IP Port Number field. The default port is 63148.
c. Select Enable from the TCP/IP Port Status list.
3. Configure the HTTP task:
a. Select Ports... > Internet Ports... > Web.
b. Enter a TCP/IP port number in the TCP/IP Port Number field. The default port is 80.
4. Allow HTTP clients to browse Domino databases:
a. Select Internet Protocols... > HTTP.
b. Select Yes for the Allow HTTP clients to browse databases parameter.
5. Enable anonymous authentication:
a. Select Ports... > Internet Ports... > Web.
b. In the Authentication Options area, select Yes from the Anonymous list.
Adding a Lotus Domino server application monitor
Before you add a Lotus Domino server application monitor, perform the following tasks:
• Contact the Lotus Domino server administrator to enable DIIOP and obtain the DIIOP authentication
information. The DIIOP authentication information is required for adding the application monitor.
• Add the hosts where the Lotus Domino server is deployed to the IMC platform so APM can obtain
and display network connections of the hosts and their access devices in the application topology.
For more information about adding hosts to the IMC Platform, see H3C IMC Base Platform
Administrator Guide.
To add a Lotus Domino server application monitor:
1. Click the Resource tab.
2. Enter the Add Application page in one of the following ways:
{
From the navigation tree, select Application Manager > Add Application.
{
From the navigation tree, select Application Manager > Application Monitor. In the application
monitor list, click Add.
The Add Application page displays all application types that can be monitored by APM.
3. Click Lotus Domino Server of the Application Server Monitor class.
The page for adding a Lotus Domino server application monitor appears.
4. Configure the following parameters:
{
IP Address—Enter the IP address of the host on which the Lotus Domino server application to be
monitored is installed. APM automatically checks the IP address and associates the application
monitor with the host if it is already managed in the IMC platform. To monitor a host that is