H3C Technologies H3C Intelligent Management Center - Manual (Page 726)

712
24 APM service report
The APM service report function is implemented through the report function of the IMC platform. The IMC
platform generates real-time reports and scheduled reports based on report templates. Operators can
use iAR to customize report templates or use report templates provided by IMC.
You can view all reports on the Report tab of the IMC platform. For information about using the report
function, see H3C IMC Base Platform Administrator Guide.
This section describes real-time reports and scheduled reports generated through APM service report
templates.
Table 13 APM report templates
Name Real-time report Scheduled report
Application health report Available Available
Application available report Available Available
Real-time reports
Operators can quickly visit APM real-time reports by clicking the Report tab of the IMC platform and
specifying report-related parameters. Real-time reports can be exported to the RPT, PDF, XLS, RTF, or CSV
format or printed in hard copy for archiving.
All APM report templates can generate real-time reports.
Application health reports
An application health report displays the Healthy state percentage of applications in a specific time
range.
To view the application health report of an application:
1. Click the Report tab.
2. In the My Real Time Reports area, click Application Health Report.
The window for setting parameters appears.
3. Set the time range for the report:
{
Begin time—Click the Begin time box and then select the start time in the YYYY-MM-DD hh:mm
format in the calendar that appears.
{
End time—Click the End time box and then select the end time in the YYYY-MM-DD hh:mm
format in the calendar that appears. You can also enter the end time in the YYYY-MM-DD
hh:mm format.
4. Click OK.
Figure 635 shows the application health report of the application.