H3C Technologies H3C Intelligent Management Center - Manual (Page 717)

703
HP MSA P2000 application monitor
HP MSA P2000 series storage devices include HP P2000 FC MSA and HP P2000 iSCSI MSA. APM
monitors HP MSA P2000 storage devices through the built-in SMI-S interface of the devices. For HP MSA
P2000 storage devices, you can add HP MSA P2000-specific application monitors in addition to
common storage device monitors.
The following information describes how to add and modify an HP MSA P2000 application monitor,
and how to view the monitor report.
Adding an HP MSA P2000 application monitor
When you add an HP MSA P2000 application monitor, follow these guidelines:
• Add the HP MSA P2000 storage device to be monitored to the IMC platform.
For a storage device managed in the IMC platform, APM obtains and displays network connection
information of the storage device and its access devices in the application topology. For more
information about adding storage devices to the IMC platform, see H3C IMC Base Platform
Administrator Guide.
• Contact the HP MSA P2000 administrator to obtain the username and password of a user with the
monitor privilege and the access rights to HTTPS/HTTP and SMI-S. The username and password are
required for adding the application monitor.
To add an HP MSA P2000 application monitor:
1. Click the Resource tab.
2. Enter the Add Application page in one of the following ways:
{
From the navigation tree, select Application Manager > Add Application.
{
From the navigation tree, select Application Manager > Application Monitor. In the application
monitor list, click Add.
The Add Application page displays all application types that can be monitored by APM.
3. Click HP MSA P2000 of the Virtual Device Monitor class.
The page for adding an HP MSA P2000 application monitor appears.
4. Configure the following parameters:
{
IP Address—Enter the IP address of the HP MSA P2000 storage device to be monitored. APM
automatically checks the IP address and associates the application monitor with the HP MSA
P2000 storage device if it is already managed in the IMC platform. To monitor an HP MSA
P2000 storage device that is already managed in the IMC platform, you can also click Select
and select the HP MSA P2000 storage device in the Select Devices dialog box. For information
about selecting an HP MSA P2000, see "2 Quick start."
{
Name—Enter a unique application monitor name. H3C recommends naming the application
monitor as Application name_HP MSA P2000 storage device IP address.
{
Use Template—Select Enable or Disable from the list.
{
Template—Click the Configure link next to the Template field to select an existing template.
The Template field is automatically populated with the name of the selected template. For more
information about configuring application templates, see "
6 Configuration management ." This
field appears only when you select Enable from the Use Template list.
{
Description—Enter a description for the application monitor.