Pointmaker CPN-5000 - Manual (Page 130)

Page 124 - Pointmaker CPN-5000 Color Video Marker Boeckeler Instruments, Inc.
Overview Section Six:Using RS-232 Commands
(M) Video Input Type
The “M” commands tell the Pointmaker which type of video input is being used or
switched to, so that the proper signal is output from the Pointmaker. All “M” com-
mands override “A” (autodetect) commands.
<Esc>( MC1N Composite 1 NTSC
<Esc>( MC2N Composite 2 NTSC
<Esc>( MYN Y/C NTSC
<Esc>( MC1P Composite 1 PAL
<Esc>( MC2P Composite 2 PAL
<Esc>( MYP Y/C 1 PAL
<Esc>( MV VGA
<Esc>( MDA1 DVI-A1
<Esc>( MDA2 DVI-A2
<Esc>( MDD1 DVI-D1
<Esc>( MDD2 DVI-D2
<Esc>( MH1 HDMI1
<Esc>( MH2 HDMI2
(ME) Verify Dialog Response
The “ME” command allows you to respond to the “Verify” dialog.
<Esc>(MEØ Responds “OK”
<Esc>(ME1 Responds “Retry”
<Esc>(ME2 Responds “Cancel”