Pointmaker CPN-5000 - Manual (Page 40)

Page 34 - Pointmaker CPN-5000 Color Video Marker Boeckeler Instruments, Inc.
Preparing the CPN-5000 for Use Section Three:CPN-5000 Menu System
From the Keyboard
1. Repeatedly activate the Change Brightness command until the mark ers
display the desired brightness level.
(see Activating the Menu, on page 27)
NOTE: You can move backwards through the brightness levels by activating
the reverse toggle command.
2. Exit the Brightness mode by selecting any other function.
From the Menu System
1. Activate the menu system (see Activating the Menu, on page 27).
The Main Menu appears (see Figure 3-1: Main Menu, on page 28).
2. Select ANNOTATION
The Annotation Menu appears (see Figure 3-3: Annotation Menu, on page 32).
3. Select BRIGHTNESS.
SET BRIGHTNESS
OK
Figure 3-5: Set Brightness Dialog
The Set Brightness dialog appears.
4. Select the level of brightness you desire.