Touch screens and whiteboards – Pointmaker CPN-5000 User Manual
Page 16
Page 10 -
Pointmaker CPN-5000 Color Video Marker
Boeckeler Instruments, Inc.
Controllers/Markers Overview
Section One:Getting Started
Touch Screens and Whiteboards
The Pointmaker CPN-5000 is engineered for use with many touch screens or
interactive whiteboards sold by other manufacturers. Contact Boeckeler Instru-
ments for compatibility information.
In general, you use the touch screen to draw, position pointers, or make menu
selections. The broad definition of the areas (or zones) on the touch screen are
listed below.
Calibrating the touch screen enhances the intuitive feel of drawing on the dis play.
It’s essential to do a rough calibration the first time you start the unit after connect-
ing the touch screen. This gives you enough control to activate the menu and do a
complete calibration. (see Calibrating CPN-5000 Controllers, on page 10).
Figure 1-5: Pointmaker Touch Screen Function Area
t
raCkinG
a
rea
The area on the touch screen that responds to the movements of your finger. Draw
and point in this area.
F
unCtion
a
reas
The eight regions on the touch screen that, when tapped, activate a function. If
you are drawing and move across one of these areas, the function is not activated.