Copying a look – Leprecon LP-X24 Manual v3.2 User Manual
Page 111
Advanced Programming and Editing Techniques
Chapter Five
107
LP-X24 and LP-X48 Users Manual
Delete Scenelist?
WARNING: Are you sure you want to delete
this scene list?
Yes / No
4. Press the Yes key to clear the playback. Press the No/Esc key to cancel the
operation.
Copying a Look
There may be instances in which you would like to use a look that you previously
created as the basis for creating a new look
but the look may be on a different
playback or may be earlier in the scene list on which you are currently working.
This technique will load the look into the Programmer so that you can "copy" it to a new
location.
To Copy a Look
1. Start by ensuring that all buttons and faders are in the proper positions.
Button/Fader
Setting
Modes Edit and Scene
Display
Any setting
Filter ML, Dim or Both (depending upon how much you
want to copy)
Bump
Any setting
Master Fader
Up (typically full on)
Manual Fader
Any setting
Programmer Fader
Up
The LP-X displays the following message: