Leprecon LP-X24 Manual v3.2 - Manual (Page 180)

176 Chapter Eleven Moving Light Effects
LP-X24 and LP-X48 Users Manual
Label
Recording new scene
Seq
Fade
0:00.0
Rate
0:01.0
Start Delay
0:00.0
Color Effect: Label Chase
Use the side wheel to display the Loops parameter.
Return to the main screen by pressing the Label softkey.
11. When you are ready, record the effect to a playback by pressing its Playback Select
button.
Seq Move Move Remove Add
Record: PG 1 PB 1 Step: 1
Param
cherry rose
broadway pin
Color Effect: Label Chase
congo blue
pink
primary gree
orange
red
red rose
12. Make additional changes to the effect and then save them by pressing the Save
softkey.
The Save softkey is only available when you are in Parameter view.