Leprecon LP-X24 Manual v3.2 - Manual (Page 33)

Quick Start Chapter One 29
LP-X24 and LP-X48 Users Manual
Button/Fader Setting
Filter Both
Bump
Any setting
Master Fader Up (typically full on)
Manual Fader Up (typically full on)
Programmer Fader Up
The LP-X displays the Moving Light Programmer.
Label
Recording new scene
ColrFx Beam Attrib Focus
No instruments selected.
Delay
0:00.0 Fade
0:00.0
100%
Dowse
Intensity:
2. Select moving lights for programming using the ML Select buttons.
The LP-X displays the labels for the light or lights that you select. For example, with
a Studio Color selected, you see the following screen when the Color labels are
displayed (by pressing the Color softkey).
Label
Recording new scene
ColrFx
Defaults
Beam Attrib Focus
No Change
amber
blue
congo blue
cto
Delay
0:00.0 Fade
0:00.0
100%
No Dowse
Intensity:
You see the following screen when the Beam labels are displayed (by pressing the
Beam softkey).