Leprecon LP-X24 Manual v3.2 - Manual (Page 179)

Moving Light Effects Chapter Eleven 175
LP-X24 and LP-X48 Users Manual
Seq Remove Move
Recording new scene
Param
blue
aqua
Color Effect: Label Chase
blue green
broadway pin
cherry rose
The LP-X determines which labels the lights have in common. It displays those
labels in alphabetical order in the column on the left.
7. If desired, change the set of labels that are included in the effect.
Remove a label from the effect by selecting the label using the Plus (+) and Minus (-
) keys or the left wheel and then pressing the Remove softkey.
Seq Remove Move Add
Recording new scene
Param
blue green
blue
Color Effect: Label Chase
broadway pin
cherry rose
congo blue
aqua
The LP-X moves the label into a column in the middle of the screen.
After removing a label from the effect, you may add it back in. Select the label using
the middle wheel and then press the Add softkey.
9. Change the position of a label in the effect by selecting it using the Plus (+) and
Minus (-) keys or the left wheel and then pressing the Move ↓ or Move ↑ softkey.
The Move ↑ softkey is not visible when the first label in the list is selected.
The Move ↓ softkey is not visible when the last label in the list is selected.
You may also move the wheel to select a label, then hold down and turn the wheel to
move the label up or down.
10. Adjust the Fade, Rate, Start Delay and Loops parameters as desired.
Press the Param softkey to display the parameters.