Leprecon LP-X24 Manual v3.2 - Manual (Page 174)

170 Chapter Eleven Moving Light Effects
LP-X24 and LP-X48 Users Manual
Parameter Explanation
Start Delay Specify how long to delay before starting the effect. The range of delays
is from 0:00.0 to 9:59.9.
Loops The number of times to execute the full chase. The default is INF
(Infinite), meaning that the chase will execute as long as the look is
active. The range of loops is from 1 to 999 or INF.
To Create a Wheel-Order Chase
Only color labels have a wheel-order chase effect.
1. Put the LP-X into the following modes for moving light recording:
Button/Fader Setting
Modes Record and Scene
Display ML
Filter ML
or BOTH
Bump Any setting
Master Fader Up (typically full on)
Manual Fader Any setting
Programmer Fader Up
The LP-X displays the Moving Light Programmer.
2. Select the lights that you want to include in the effect.
See "Selecting Moving Lights for Programming" beginning on page 87 for complete
details about selecting lights.
3. Press the Color softkey twice.
The Color Effects screen appears.
Create
Recording new scene
None of the selected instruments have
effects.
Press Create to add effects.
Color Effects
4. Press the Create softkey.