Leprecon LP-X24 Manual v3.2 - Manual (Page 34)

30 Chapter One Quick Start
LP-X24 and LP-X48 Users Manual
Label
Recording new scene
Color
Defaults
BeamFx Attrib Focus
No Change
belly
fade
off-center c
open
Delay
0:00.0 Fade
0:00.0
100%
No Dowse
Intensity:
You see the following screen when the Focus labels are displayed (by pressing the
Focus softkey.
Label
Recording new scene
Color Beam Attrib FocsFx
No Change
Delay
0:00.0 Fade
0:00.0
100%
No Dowse
Intensity:
Defaults
When you select more than one instrument, the Moving Light Programmer displays
an intersection of labels that are common to the instruments
that is to say, the ones
that the instruments have in common.
3. If you haven't already done so, create a focus label or labels for the look or point the
instruments by attribute programming.
Please see "To Create a Focus Label" beginning on page 127 or "Chapter Seven:
Working with Moving Light Attributes" beginning on page 137 for complete details.
4. Select the desired color, beam and focus labels and set the intensity for each light.
The following is a common scenario for selecting the labels that you want or for
setting the intensity.
You have ten moving lights in the look. You want the five lights on the right side of
the stage to be pink. You want the five lights on the left side of the stage to be blue.
You select the five lights on the right side of the stage. The label Pink appears in the
display, indicating that all five lights have that color in common. You select that label.
You deselect the lights.