Leprecon LP-X24 Manual v3.2 - Manual (Page 187)

Moving Light Effects Chapter Eleven 183
LP-X24 and LP-X48 Users Manual
Random Motion Effect Parameters
Random motion effects include the ballyhoo.
Parameter Explanation
Pan Min Used with Tilt Min, Pan Max and Tilt Max to specify the range in which
the random motion will take place. Values range from 0 to 255. The
default value is 0.
Tilt Min Used with Pan Min, Pan Max and Tilt Max to specify the range in which
the random motion will take place. Values range from 0 to 255. The
default value is 0.
Pan Max Used with Pan Min, Tilt Min and Tilt Max to specify the range in which
the random motion will take place. Values range from 0 to 255. The
default value is 255.
Tilt Max Used with Pan Min, Tilt Min and Pan Max to specify the range in which
the random motion will take place. Values range from 0 to 255. The
default value is 255.
Speed The speed at which the lights will move. Values range from 1 to 100 with
one being the slowest possible speed and 100 being the fastest possible
speed. The default value is 50.
Start Delay Specify how long to delay before starting the effect. The range of delays
is from 0:00.0 to 9:59.9. The default is 0.
Loops The number of times to move across the specified range.
The default is INF (Infinite), meaning that the effect will execute as long
as the look is active. The range of loops is from 1 to 999 or INF.
Example: a loop count of 1 means that the lights will go to one edge of
the range and then move across to another edge of the range.
To Create a Focus Effect
1. Put the LP-X into the following modes for moving light recording:
Button/Fader Setting
Modes Record and Scene
Display ML
Filter ML
or BOTH
Bump Any setting
Master Fader Up (typically full on)
Manual Fader Any setting
Programmer Fader Up
The LP-X displays the Moving Light Programmer.