Leprecon LP-X24 Manual v3.2 - Manual (Page 194)

190 Chapter Eleven Moving Light Effects
LP-X24 and LP-X48 Users Manual
NOTE: If you override any attribute that is part of an effect, the effect will stop for that
attribute. For example, if you override the pan or tilt for a light that is part of a focus
effect, you automatically stop the effect from running for that light until you remove the
override. Similarly, if you override the color for a light that is part of a color label effect,
the effect will stop running for that light.
To Override an Attribute
1. From the ML Programmer screen, press the Attrib softkey and then press the
softkey for the property Color, Beam or Focus.
You may also press the Attrib key from the Effects screen.
2. Override the attributes as desired.
Please see "Chapter Seven: Working with Moving Light Attributes" beginning on
page 137 for complete details on overriding attributes.
3. Press the Save softkey when you are done.
4. To remove the attribute overrides, with the light selected hold down the Clear key
and press the Attrib softkey.