Lenze ELCAMZIxxx4SNNPSNN (LCU122) - Manual (Page 101)

PROFIsafe on board
Code table
Diagnostics
6

101 EDSLCMX3024-SPS EN 5.0
C1571:
Extended diagnostics
Code Subcode Index
Possible settings
Data type Lenze Selection
C1571 23004
d
=
59DC
h
0 BITFIELD_8
Bit 0: Trip
Bit 1: Reserved
Bit 2: Reserved
Bit 3: Reserved
Bit 4: Warning
Bits 5 ... 7: Reserved
Via this code, bit 3 in byte 1 of the DP diagnostics messages is influenced (= external
diagnostics bit or diag-bit). The master system evaluates the diag-bit separately.
In the Lenze setting, the extended diagnostics function is switched off.

Note!
ƒ The selection in this code only refers to faults in the standard device:
– If one of the selected faults occurs in the standard device, the diag-bit is
set.
ƒ In case of faults concerning internal safety engineering, the diag-bit is
always set.