Lenze ELCAMZIxxx4SNNPSNN (LCU122) - Manual (Page 48)

PROFIsafe on board
Process data transfer
Device control
6

48 EDSLCMX3024-SPS EN 5.0
6.3.1 Device control
6.3.1.1 Configuration of process data
Use the free process data configuration to assign the max. 10 PROFIBUS process data
words to the motor starter process data words. Define the assignments in codes C1511
(process output data) and C1510 (process input data).

Tip!
The ”view” is always from the master.
ƒ The master sends process output data in max. 10 process data output words
(POW) to the bus device.
ƒ The master receives process input data in max. 10 process data input words
(PIW) from the bus device.