Lenze ELCAMZIxxx4SNNPSNN (LCU122) - Manual (Page 138)

Commissioning
Preconditions
The E82ZBB diagnosis terminal
8

138 EDSLCMX3024-SPS EN 5.0
8 Commissioning
8.1 Preconditions
8.1.1 The E82ZBB diagnosis terminal
You require a E82ZBB diagnosis terminal to commission the motor starter. The diagnosis
terminal and the required connecting cable are available as parts of the accessories. The
complete description can be gathered from the leaflet enclosed with the diagnosis
terminal:
Description
 Function keys
 Status displays
 Bar graph display
 Function bar 1
 Function bar 2
 Parameter set
Change possible
when the display is
blinking
 Code number
 Subcode number
 Parameter value with unit
All parameters by means of which you can parameterise or monitor the drive are stored in
so-called codes in the user and All menus. The codes are numbered  and marked with a
”C” in the text. In some codes, the parameters are stored in numbered “subcodes” , so
that the parameter setting remains clear (example: C0517 user menu).
ƒ The user menu
– is active after every mains switching if the diagnosis terminal is connected or if
you connect the diagnosis terminal to the X70 interface during operation.
– can be composed according to your wishes in C0517.
ƒ In the All menu
– all codes are contained.
– the codes are sorted numerically in ascending order.