Lenze ELCAMZIxxx4SNNPSNN (LCU122) - Manual (Page 72)

PROFIsafe on board
Parameter data transfer
PROFIdrive parameter data channel (DP-V1, acyclic)
6

72 EDSLCMX3024-SPS EN 5.0
Error code list
Error code Description Explanation Additional
information
0x0000 Impermissible
parameter number
Access to unavailable parameter -
0x0001 Parameter value
cannot be changed
Change access to a parameter value that cannot be
changed
Subindex
0x0002 Low or high value
limit exceeded
Change access with value outside the value limits Subindex
0x0003 Faulty subindex Access to unavailable subindex Subindex
0x0004 No array Access with subindex to non-indexed parameter -
0x0005 Incorrect data type Change access with value that does not match the data
type of the parameter
-
0x0006 Setting not permitted
(can only be reset)
Change access with value unequal to 0 where this is not
permitted
Subindex
0x0007 Description element
cannot be changed
Change access to a description element that cannot be
changed
Subindex
0x0008 Reserved (PROFIdrive Profile V2: PPO-Write requested in IR not
available)
-
0x0009 No description data
available
Access to unavailable description (parameter value is
available)
-
0x000A Reserved (PROFIdrive Profile V2: Access group wrong) -
0x000B No operation priority Change access without rights to change parameters -
0x000C Reserved (PROFIdrive Profile V2: Wrong password) -
0x000D Reserved (PROFIdrive Profile V2: Text cannot be read in cyclic data
transfer)
-
0x000E Reserved (PROFIdrive Profile V2: Name cannot be read in cyclic data
transfer)
-
0x000F No text array
available
Access to text array that is not available (parameter value
is available)
-
0x0010 Reserved (PROFIdrive Profile V2: No PPO-Write) -
0x0011 Request cannot be
executed because of
operating state
Access is temporarily not possible for reasons that are not
specified in detail
-
0x0012 Reserved (PROFIdrive Profile V2: Other error) -
0x0013 Reserved (PROFIdrive Profile V2: Data cannot be read in cyclic data
transfer)
-
0x0014 Value impermissible Change access with a value that is within the value limits
but is not permissible for other long-term reasons
(parameter with defined single values)
Subindex
0x0015 Response too long The length of the current response exceeds the maximum
transmittable length
0x0016 Parameter address
impermissible
Illegal value or value which is not supported for the
attribute, number of subindexes, parameter number or
subindex or a combination
0x0017 Illegal format Write request: Illegal format or format of the parameter
data which is not supported
0x0018 Number of values not
consistent
Write request: Number of the values of the parameter
data does not match the number of subindexes in the
parameter address
...
to 0x0064
Reserved - -
0x0065
...
0x00FF
Manufacturer-specific - -