Lenze ELCAMZIxxx4SNNPSNN (LCU122) - Manual (Page 145)

Commissioning
Code table
8

145 EDSLCMX3024-SPS EN 5.0
IMPORTANT Possible settings Code
Selection Lenze Designation No.
C0002

uSEr
(Cont.)
Restoring the
delivery status
1 Lenze setting ÖPAR1 Restore delivery status in the
selected parameter set of the
standard device
2 Lenze setting ÖPAR2
3 Lenze setting ÖPAR3
4 Lenze setting ÖPAR4
31 Lenze setting ÖFPAR1 Restore delivery status in the
PROFIBUS function module
61 Lenze setting ÖPAR1 + FPAR1 Restore delivery status in the
selected parameter set of the
standard device and in the
PROFIBUS function module
62 Lenze setting ÖPAR2 + FPAR1
63 Lenze setting ÖPAR3 + FPAR1
64 Lenze setting ÖPAR4 + FPAR1
Transferring
parameter sets via
keypad
By means of the keypad, you can
transfer the parameter sets to
other standard devices and
PROFIBUS function modules.
During the transfer, access to
the parameters via other
channels is inhibited!
70 Keypad Ö PAR1 ... PAR4 + FPAR1 Overwrite all parameter sets of
the standard device
(PAR1 ... PAR4) and the
parameter set of the PROFIBUS
function module (FPAR1) with
the respective data of the
keypad
71 Keypad Ö PAR1 + FPAR1 Overwrite the selected
parameter set in the standard
device and FPAR1 in the
PROFIBUS function module with
the respective data of the
keypad
72 Keypad Ö PAR2 + FPAR1
73 Keypad Ö PAR3 + FPAR1
74 Keypad Ö PAR4 + FPAR1
80 PAR1 ... PAR4 + FPAR1 Ö keypad Copy all parameter sets of the
standard device (PAR1 ... PAR4)
and the parameter set of the
PROFIBUS function module
(FPAR1) to the keypad
40 Keypad Ö FPAR1 Only overwrite the parameter
set of the PROFIBUS function
module (FPAR1) with the
respective data of the keypad
50 FPAR1 Ö keypad Only copy the parameter set of
the PROFIBUS function module
(FPAR1) to the keypad