Lenze ELCAMZIxxx4SNNPSNN (LCU122) - Manual (Page 133)

Safety engineering
Safety functions
Safe PROFIsafe connection
7

133 EDSLCMX3024-SPS EN 5.0
PROFIsafe parameters
These PROFIsafe parameters and contents are supported:
PROFIsafe parameters
Name
Description Valid contents
F_Source_Add PROFIsafe source address of the safety PLC 0x01 ... 0xFFFE
F_Dest_Add PROFIsafe target address of the device 0x01 ... 0xFFFE
F_WD_Time PROFIsafe monitoring time of the device 110 ... 65535 ms
F_Check_SeqNo Check sequence no. in CRC 0
F_Check_iPar Check iparameters CRC3 in CRC 0
F_SIL Supported SIL (Safety Integrity Level) 0
Æ
SIL1
1 Æ SIL2
2 Æ SIL3
F_CRC_Length Length of CRC 1
F_Block_ID Identification of the parameter type 0
F_Par_Version Version of the safety layer 0
F_Par_CRC Cyclic CRC Is calculated
Tab. 7-15 Supported PROFIsafe parameters