Lenze ELCAMZIxxx4SNNPSNN (LCU122) - Manual (Page 92)

PROFIsafe on board
Code table
Monitoring
6

92 EDSLCMX3024-SPS EN 5.0
C1513:
Response monitoring time of PCD communication
Code Subcode Index
Possible settings
Data type Lenze Selection
C1513 - 23062
d
=
5A16
h
3000 0 [1 ms] 65535 FIX32
The value of the response monitoring time is provided by the master.

Note!
A change in monitoring is immediately effective.
Monitoring starts with the receipt of the first telegram.

Tip!
The value = 0 in C1513 deactivates monitoring.
C1514:
Monitoring response in case of PCD communication fault
Code Subcode Index
Possible settings
Data type Lenze Selection
C1514 - 23061
d
=
5A15
h
0 0 [1] 2 FIX32
0: No action;
1: TRIP (fault)
2: CINH (controller inhibit)
If the master does not send a message within the response monitoring time (configurable
under C1513), the action set under this code is executed.

Note!
A change in the monitoring response is effective immediately.