Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual User Manual
Rockwell Automation Equipment
Advertising
Table of contents
Document Outline
- Stratix 5100 Wireless Access Point/Workgroup Bridge User Manual
- Important User Information
- Table of Contents
- Preface
- 1 - Getting Started with the Stratix 5100 WAP
- 2 - Install the Stratix 5100 Wireless Access Point/ Workgroup Bridge
- Ports and Connections
- Stratix 5100 WAP Specifications
- External Antennas
- Preparing the Access Point
- Initial configuration
- Prevent Damage to the WAP
- Install the WAP
- Grounding the Access Point
- Securing the Access Point
- Mounting the Access Point
- Deploying the Access Point on the Wireless Network
- Configure the Access Point
- 3 - Stratix 5100 Device Manager Configuration Startup
- Using Device Manager
- Before You Start
- Login to the Stratix 5100 WAP
- Obtain and Assign an IP Address
- Connect to the Stratix 5100 WAP Access Point Locally
- Default Radio Settings
- Reset the WAP to Default Settings
- Logging into the Access Point
- Using Online Help
- Configure the Basic Settings for an Access Point
- Enable the Radio on the Network
- Using VLANs
- Configuring Security
- CLI Configuration Example
- Deleting an HTTPS Certificate
- Disabling the Web Browser Interface
- 4 - Stratix 5100 Device Manager Parameter Definitions
- 5 - Configure the Stratix 5100 WAP Using the Command-Line Interface
- Cisco IOS Command Modes
- Getting Help
- Using No and Default Forms of Commands
- Understanding CLI Messages
- Using Command History
- Recalling Commands
- Using Editing Features
- Searching and Filtering Output of show and more Commands
- Accessing CLI
- Opening CLI with Secure Shell
- Security CLI Configuration Examples
- Assign an IP Address by Using CLI
- Using a Terminal Application Session to Access CLI
- Configuring the 802.1X Supplicant
- Creating a Credentials Profile
- Creating and Applying EAP Method Profiles
- 6 - Administering the WAP Access
- Disabling the Mode Button
- Preventing Unauthorized Access to Your Access Point
- Protecting Access to Privileged EXEC Commands
- Default Password and Privilege Level Configuration
- Setting or Changing a Static Enable Password
- Protecting Enable and Enable Secret Passwords with Encryption
- Configuring Username and Password Pairs
- Configuring Multiple Privilege Levels
- Controlling Access Point Access with RADIUS
- Controlling Access Point Access with TACACS+
- Configuring Ethernet Speed and Duplex Settings
- Configuring the Access Point for Wireless Network Management
- Configuring the Access Point for Local Authentication and Authorization
- Configuring the Authentication Cache and Profile
- Configuring the Access Point to Provide DHCP Service
- Monitoring and Maintaining the DHCP Server Access Point
- Configuring the Access Point for Secure Shell
- Configuring Client ARP Caching
- Managing the System Time and Date
- Defining HTTP Access
- Configuring a System Name and Prompt
- Default System Name and Prompt Configuration
- Understanding DNS
- 7 - Configuring Radio Settings
- Enabling the Radio Interface
- Configuring the Role in Radio Network
- Universal Workgroup Bridge Mode
- Configuring Dual-radio Fallback
- Radio Tracking
- Fast Ethernet Tracking
- MAC-Address Tracking
- Configuring Radio Data Rates
- Access Points Send Multicast and Management Frames at Highest Basic Rate
- Configuring MCS Rates
- Configuring Radio Transmit Power
- Limiting the Power Level for Associated Client Devices
- Configuring Radio Channel Settings
- 802.11n Channel Widths
- Dynamic Frequency Selection
- CLI Commands
- Configuring a Channel
- Setting the 802.11n Guard Interval
- Configuring Location-based Services
- Disabling and Enabling Short Radio Preambles
- Configuring Transmit and Receive Antennas
- Enabling and Disabling Gratuitous Probe Response
- Disabling and Enabling Aironet Extensions
- Configuring the Ethernet Encapsulation Transformation Method
- Enabling and Disabling Reliable Multicast to Workgroup Bridges
- Enabling and Disabling Public Secure Packet Forwarding
- Configuring Protected Ports
- Configuring the Beacon Period and the DTIM
- Configure RTS Threshold and Retries
- Configuring the Maximum Data Retries
- Configuring the Fragmentation Threshold
- Enabling Short Slot Time for 802.11g Radios
- Performing a Carrier Busy Test
- Configuring ClientLink
- Debugging Radio Functions
- 8 - Configuring Multiple SSIDs
- 9 - Configuring Spanning Tree Protocol
- 10 - Configure an Access Point as a Local Authenticator
- Understanding Local Authentication
- Configuring a Local Authenticator
- Configuring/Enabling Local MAC Authentication
- Creating and Enabling MAC Authentication by Using RADIUS Server
- Configuring Network EMAP
- Configuring the Local Authenticator Access Point by Using CLI
- Configuring EAP-FAST Settings
- Limiting the Local Authenticator to One Authentication Type
- Unblocking Locked Usernames
- Using Debug Messages
- 11 - Configuring Cipher Suites and WEP
- 12 - Configuring Authentication Types
- Understanding Authentication Types
- Open Authentication to the Access Point
- Using WPA Key Management
- Configuring Authentication Types
- Configuring Additional WPA Settings
- Configuring Authentication Hold-off, Timeout, and Interval
- Creating and Applying EAP Method Profiles for the 802.1X Supplicant
- Matching Access Point and Client Device Authentication Types
- 13 - Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services
- Understanding WDS
- Understanding Fast Secure Roaming
- Understanding Radio Management
- Understanding Layer 3 Mobility
- Understanding Wireless Intrusion Detection Services
- Configuring WDS
- Configuring Access Points as Potential WDS Devices
- CLI Configuration Example
- Configuring Fast Secure Roaming
- Configuring Management Frame Protection
- Management Frame Protection
- Client MFP for Access Points in Root Mode
- Configuring Radio Management
- Configuring Access Points to Participate in WIDS
- Configuring WLSM Failover
- 14 - Configuring RADIUS and TACACS+ Servers
- Configuring and Enabling RADIUS
- RADIUS Operation
- Configuring RADIUS
- Default RADIUS Configuration
- Identifying the RADIUS Server Host
- Configuring RADIUS Login Authentication
- Defining AAA Server Groups
- Configuring RADIUS Authorization for User Privileged Access and Network Services
- Configuring Packet of Disconnect
- Starting RADIUS Accounting
- Selecting the CSID Format
- Configuring the Access Point to Use Vendor-specific RADIUS Attributes
- Configuring the Access Point for Vendor-proprietary RADIUS Server Communication
- Configuring and Enabling TACACS+
- TACACS+ Operation
- Configuring TACACS+
- Default TACACS+ Configuration
- Identifying the TACACS+ Server Host and Setting the Authentication Key
- Configuring TACACS+ Login Authentication
- Configuring TACACS+ Authorization for Privileged EXEC Access and Network Services
- Starting TACACS+ Accounting
- Displaying the TACACS+ Configuration
- Configuring and Enabling RADIUS
- 15 - Configuring VLANs
- 16 - Configuring QoS
- 17 - Configuring Filters
- 18 - Configuring CDP
- 19 - Configuring SNMP
- Understanding SNMP
- Configuring SNMP
- Default SNMP Configuration
- Enabling the SNMP Agent
- Configuring Community Strings
- Specifying SNMP-Server Group Names
- Configuring SNMP-Server Hosts
- Configuring SNMP-Server Users
- Configuring Trap Managers and Enabling Traps
- Setting the Agent Contact and Location Information
- Using the snmp-server view Command
- SNMP Examples
- Displaying SNMP Status
- 20 - Configuring Repeater and Standby Access Points and Workgroup Bridge Mode
- Understanding Repeater Access Points
- Configuring a Repeater Access Point
- Setting Up a Repeater
- Aligning Antennas
- Verifying Repeater Operation
- Setting Up a Repeater as a LEAP Client
- Setting Up a Repeater as a WPA Client
- Understanding Hot Standby
- Configuring Hot Standby
- Configuring a Hot Standby Access Point by Using CLI
- Verifying Standby Operation
- Understanding Workgroup Bridge Mode
- Treating Workgroup Bridges as Infrastructure Devices or as Client Devices
- Configuring a Workgroup Bridge for Roaming
- Configuring a Workgroup Bridge for Limited Channel Scanning
- Workgroup Bridge VLAN Tagging
- Configuring Workgroup Bridge Mode
- Using Workgroup Bridges in a Lightweight Environment
- Guidelines for Using Workgroup Bridges in a Lightweight Environment
- Sample Workgroup Bridge Configuration
- Enabling VideoStream Support on Workgroup Bridges
- 21 - Configuring System Message Logging
- Understanding System Message Logging
- Configuring System Message Logging
- Default System Message Logging Configuration
- Disabling and Enabling Message Logging
- Setting the Message Display Destination Device
- Enabling and Disabling Timestamps on Log Messages
- Enabling and Disabling Sequence Numbers in Log Messages
- Defining the Message Severity Level
- Limiting Syslog Messages Sent to the History Table and to SNMP
- Setting a Logging Rate Limit
- Configuring UNIX Syslog Servers
- Displaying the Logging Configuration
- 22 - Troubleshooting
- A - Protocol Filters
- B - Supported MIBs
- Error and Event Messages
- Conventions
- Software Auto Upgrade Messages
- Association Management Messages
- Unzip Messages
- System Log Messages
- 802.11 Subsystem Messages
- Inter-Access Point Protocol Messages
- Local Authenticator Messages
- WDS Messages
- Mini IOS Messages
- Access Point/Bridge Messages
- Cisco Discovery Protocol Messages
- External Radius Server Error Messages
- LWAPP Error Messages
- Sensor Messages
- SNMP Error Messages
- SSH Error Messages
- Glossary
- Index
- Back cover