Using the tftp interface – Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual User Manual
Page 567
Advertising
![background image](/manuals/579394/567/background.png)
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
567
Troubleshooting
Chapter 21
4. Click the System Software tab.
The Summary Status page appears.
5. Click Software Upgrade.
The HTTP Upgrade screen appears.
6. Browse to the image file on your PC.
7. Click Upload.
Using the TFTP Interface
The TFTP interface allows you to use a TFTP server on a network device to load
the wireless device image file. Follow the instructions below to use a TFTP
server:
1. Open your Internet browser.
You must use Microsoft Internet Explorer (version 6.x or later) or
Netscape Navigator (version 7.x).
2. Enter the wireless device’s IP address in the browser address line and press
Enter.
An Enter Network Password screen appears.
Advertising