Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 341)

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 341
Configure an Access Point as a Local Authenticator Chapter 10
Using Debug Messages In privileged exec mode, enter this command to control the display of debug
messages for the local authenticator:
AP# debug radius local-server { client | eapfast |
error | packets}
Use the command options to display this debug information:
• Use the
client option to display error messages related to failed client
authentications.
• Use the
eapfast option to display error messages related to EAP-FAST
authentication. Use the sub-options to select specific debugging
information:
–
encryption — information on the encryption and decryption of
received and transmitted packets.
–
events — information on all EAP-FAST events.
–
pac —information on events related to PACs, such as PAC generation
and verification.
–
pkts — The packets sent to and received from EAP-FAST clients.
• Use the
error option to display error messages related to the local
authenticator.
• Use the
packets option to turn on display of the content of RADIUS
packets sent and received.