Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual User Manual
Page 212
212
Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 6
Administering the WAP Access
• (Optional) For
key string
, specify the authentication and
encryption key used between the wireless device and the RADIUS
daemon running on the RADIUS server.
To configure the wireless device to recognize more than one host entry associated
with a single IP address, enter this command as many times as necessary, making
sure that each UDP port number is different. The wireless device software
searches for hosts in the order that you specify them. Set the timeout, retransmit,
and encryption key values to use with the specific RADIUS host.
4. Define the AAA server-group with a group name.
This command puts the wireless device in a server group configuration
mode.
aaa group server radius group-name
5. Associate a particular RADIUS server with the defined server group.
Repeat this step for each RADIUS server in the AAA server group.
Each server in the group must be previously defined in Step 2.
server ip-address
6. Return to privileged EXEC mode.
end
7. Verify your entries.
show running-config
8. (Optional) Save your entries in the configuration file.
copy running-config startup-config
9. Enable RADIUS login authentication.
Configuring RADIUS Login Authentication on page 209
information.
• To remove the specified RADIUS server, use the
no radius-
server host hostname | ip-address
global configuration
command.
• To remove a server group from the configuration list, use the
no aaa
group server radius group-name
global configuration
command.
• To remove the IP address of a RADIUS server, use the
no server
ip-address
server group configuration command.
TIP
The key is a text string that must match the encryption key used on the
RADIUS server. Always configure the key as the last item in the radius-
server host command. Leading spaces are ignored, but spaces within
and at the end of the key are used. If you use spaces in your key, don’t
enclose the key in quotation marks unless the quotation marks are
part of the key.