Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 98)

98 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 4 Stratix 5100 Device Manager Parameter Definitions
Multicasts Received/Sent By Host Number of Multicast Packets Received/Sent by the server.
Mgmt Packets Received/Sent Number of Management Packets Received/Sent by the access point.
RTS Received/Transmitted Number of CTS frames received by the access point in response to an RTS
frame.
Duplicate Frames Number of times a frame with a sequence control field that indicates it is a
duplicate is received.
CTS Not Received Number of CTS frames not received by the access point.
CRC Errors Displays the number of packets with CRC errors.
Unicast Fragments Sent Number of fragments of frames that the access point transmitted.
WEP Errors Number of frames that are discarded because the access point could not
decrypt them or because they were not encrypted.
Retries Number of attempts to send a packet.
Buffer full Message that is sent to the sending device to suspend transmission until the
data in the buffers has been processed.
Packets With One Retry Number of transmitted packets with one try.
Host Buffer Full Message that is sent to the sending device to suspend transmission until the
data in the buffers has been processed.
Packets With More Than One Retry Number of transmitted packets with more than one try.
Header CRC Errors Number of header CRC errors received.
Protocol Defers Number of transmitted protocol defers.
Invalid Header Number of invalid headers received.
Energy Detect Defers Number of transmitted energy detect defers.
Length Invalid Number of packets received that have invalid lengths.
Jammer Detected Number of jamming devices detected.
Incomplete Fragments Number of packets received that are fragmented.
Rx/Tx Contacts Receive and Transmit
Table 19 - Network Interfaces: Radio0-802.11N2.4 GHz and 5 GHz Detailed Status (Continued)
Parameter Description