Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 484)

484 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 17 Configuring Filters
7. From the Action pull-down menu, choose Forward or Block.
8. Click Add.
The MAC address appears in the Filters Classes field.
To remove the MAC address from the Filters Classes list, select it and click
Delete Class.
9. Repeat
step 5 through step 8 to add addresses to the filter.
10. From the Default Action menu, choose Forward All or Block All.
The default action of the filter must be the opposite of the action for at
least one of the addresses in the filter.
For example, if you enter several addresses and you choose Block as the
action for all of them, you must choose Forward All as the filter’s default
action.
11. Click Apply.
The filter is saved on the access point, but it is not enabled until you apply
it on the Apply Filters page.
12. Return to the Apply Filters page.